| 水处理设备的清洗维护对于设备的正常运行和使用寿命至关重要 |
| 添加时间：2025/6/16 21:07:27 浏览次数： |
| 水处理设备的清洗维护对于设备的正常运行和使用寿命至关重要，以下是具体的清洗维护方法： The cleaning and maintenance of water treatment equipment is crucial for its normal operation and service life. The following are specific cleaning and maintenance methods: 日常清洗维护 Daily cleaning and maintenance 格栅除污机：每天运行结束后，及时清除格栅上截留的杂物，防止其堵塞格栅间隙，影响后续处理流程。可采用人工清理或机械清理的方式，对于较顽固的污垢，可使用高压水枪冲洗。 Grille cleaning machine: After running every day, promptly remove the debris trapped on the grille to prevent it from blocking the grille gap and affecting the subsequent processing flow. Manual or mechanical cleaning methods can be used, and for stubborn dirt, high-pressure water guns can be used for flushing. 沉砂池：定期排空沉砂池中的沉砂，一般每周至少一次。使用专用的清砂设备将沉砂清除，并对池壁和池底进行冲洗，去除附着的污垢和残留的沉砂。 Sand settling tank: Regularly empty the sand settling tank, usually at least once a week. Use specialized sand cleaning equipment to remove sediment, and rinse the pool walls and bottom to remove attached dirt and residual sediment. 初沉池：每日观察初沉池的运行状况，及时清理池面的浮渣和池底的沉淀物。可使用刮泥机将沉淀物刮至排泥口排出，然后用清水冲洗池壁和管道。 Primary sedimentation tank: Observe the operation status of the primary sedimentation tank daily, and promptly clean the floating slag on the surface and sediment at the bottom of the tank. A scraper can be used to scrape the sediment to the discharge outlet, and then rinse the tank wall and pipes with clean water. 曝气池：定期对曝气头进行检查和清洗，防止曝气头堵塞影响曝气效果，一般每1-2周进行一次。可采用化学清洗或物理清洗的方法，化学清洗可使用稀盐酸等溶液浸泡曝气头，物理清洗可使用高压水枪冲洗或人工擦拭。 Aeration tank: Regularly inspect and clean the aeration head to prevent blockage and affect the aeration effect, usually once every 1-2 weeks. Chemical cleaning or physical cleaning methods can be used. Chemical cleaning can use dilute hydrochloric acid or other solutions to soak the aeration head, while physical cleaning can use high-pressure water guns to rinse or manually wipe. 二沉池：二沉池的维护与初沉池类似，需及时清理浮渣和沉淀物，确保出水水质。同时，要检查二沉池的刮泥机和排泥设备是否正常运行，如有故障及时修复。 Secondary sedimentation tank: The maintenance of the secondary sedimentation tank is similar to that of the primary sedimentation tank, and it is necessary to clean the floating slag and sediment in a timely manner to ensure the quality of the effluent. At the same time, it is necessary to check whether the scraper and sludge discharge equipment of the secondary sedimentation tank are operating normally, and repair them in a timely manner if there are any faults. |
| 上一页 对污水处理设备进行全面的清洗和消毒 |
| 下一页 水处理设备需要定期维护，如更换滤芯等 |