| 锅炉软化水处理解决方案 |
| 添加时间：2018/7/24 10:33:43 浏览次数： |
| 锅炉软化水处理解决方案 Solution of boiler softening water treatment 一、产品工作原理： First, the principle of the work of the product: 水的硬度主要是由其中的阳离子：钙（Ca2+）、镁(Mg2+)离子构成的。当含有硬度离子的原水通过交换器树脂层时，水中的钙、镁离子与树脂内的钠离子发生置换，树脂吸附了钙、镁离子而钠离子进入水中，这样从交换器内流出的水就是去掉了硬度离子的软化水。随着交换过程的不断进行，树脂中Na+全部被置出来后就失去了交换功能，此时必须使用Nacl溶液对树脂进行再生，将树脂吸附的Ca2+、Mg2+置换下来，树脂重新吸附了钠离子，恢复了软化交换能力。 The hardness of water is mainly composed of cations: calcium (Ca2+) and magnesium (Mg2+) ions. When the raw water containing the hardness ion passes through the resin layer of the exchanger, the calcium and magnesium ions in the water are replaced by the sodium ions in the resin. The resin adsorbs calcium and magnesium ions and the sodium ions enter the water. So the water flowing out from the exchanger is the softened water to remove the hardness ions. With the continuous exchange process, the exchange function was lost after the Na+ was all set out in the resin. At this time, the resin must be regenerated by using Nacl solution. The resin adsorbed Ca2+ and Mg2+ were replaced, the resin readsorbed the sodium ion, and the softening exchange ability was restored. 二、产品结构： Two. Product structure: 多路阀控制器，软水罐、001×7强酸性阳离子交换树脂、布水器、盐阀、盐箱等。 Multi way valve controller, soft water tank, 001 * 7 strong acid cation exchange resin, water distributor, salt valve, salt box and so on. 三、用途： Three. Use: 主要用于工业及民用软化水设备，如锅炉给水、空调系统补充水，换热器以及纯水系统的预处理。 It is mainly used for industrial and civilian softening water equipment, such as boiler feed water, air conditioning system supplementary water, heat exchanger and pure water system pretreatment. 四、设备特点： Four. Characteristics of equipment: 1、自动化程度高，供水工况稳定。 1. High degree of automation and stable water supply. 2、先进程序控制装置，运行准确可靠，替代手工操作，完全实现水处理的各个环节的自动转换。 2. Advanced process control device, which runs accurately and reliably, instead of manual operation, fully realizes automatic conversion of all links in water treatment. 3、高效率低能耗，运行费用经济。由于软水器整体设计合理，使树脂的交换能力得以充分发挥，设备采用射流式吸盐，替代盐泵，降低了能耗。 3, high efficiency and low energy consumption, operation cost economy. Because the overall design of the softener is reasonable, the exchange capacity of the resin can be brought into full play. The equipment adopts the jet type salt absorption instead of the salt pump to reduce the energy consumption. 4、设备结构紧凑，占地面积小，节省了基建投资，安装、调试，使用简便易行，运行安全可靠全自动软水器是我公司引进的美国富莱克（Fleck ）阿图祖（AUTOTROL）品牌的全动水力控制阀，配以优质水处理配件组装加工的新型全自动软水设备。具备工作 4, the equipment is compact, small area, saving the capital investment, installation, debugging, easy to use, safe and reliable full automatic water softener is our company's imported Fleck AUTOTROL brand full dynamic hydraulic control valve, with excellent quality water treatment parts assembly processing new whole Automatic soft water equipment. Have a job 参数的最佳组合，在此基础上，力求保证 出水水质优良的前提下.水耗、电耗、盐耗最低。其阀芯不但水力学性能超群，且坚固耐磨、耐腐蚀、无铅黄铜质阀体无毒无害，使用寿命长。采用美国耐腐蚀高强度FRP或国产复合玻璃钢、不锈钢压力容器，高性能大容量钠型离子交换树脂。优于国家新标准（GB／T 18300-2001），技术性能处于国内领先地位。本系列软水设备的每一种型号都是经过精心计算，设计及实践， 性能稳定、操作简便、安全节能、出水水质优、适用范围广，在全国各地区被广泛应用，并取得一致好评。 产品处理能力从为0.25T/H到80T/H，有时间控制型、流量控制型、连续供水系统型多种系列，有单阀单罐、单阀双罐、双阀双罐并联、大型多阀多罐串联等多种形式，提供全面的技术参数及技术服务，充分适合不同地区不同水质不同产水要求的需求。用户如对产品有特殊要求，我公司可专门设计配制，部件性能稳定。 On the basis of the best combination of parameters, we strive to ensure that the water consumption, electricity consumption and salt consumption are the lowest under the premise that the effluent quality is excellent. Its spool not only has high hydraulic performance, but also is strong, wear resistant, corrosion resistant, lead-free brass valve body harmless and harmless, and has long service life. The United States is corrosion-resistant high strength FRP or domestic composite glass steel, stainless steel pressure vessel, high performance and large capacity sodium ion exchange resin. It is superior to the new national standard (GB / T 18300-2001), and its technical performance is in the leading position in China. Each model of this series of soft water equipment is carefully calculated, designed and practice, with stable performance, easy operation, safety and energy saving, excellent water quality and wide application range. It is widely used in all regions of the country and has gained good praise. Product processing ability from 0.25T/H to 80T/H, with time control, flow control, continuous water supply system type series, with single valve single tank, single valve double tank, double valve double tank parallel, large multiple valves and multiple tanks in series, providing comprehensive technical parameters and technical services, fully suitable for different areas of different water quality. Demand for water production requirements. If the user has special requirements for the products, our company can specially design and make the components with stable performance. 五、技术指标： Five. Technical indicators: 1）出水硬度：≤0.03mgN/L 1) the hardness of the effluent: less than 0.03mgN/L 2) 工作压力：0.2-0.6MPa 工作温度：5-50℃ 2) working pressure: 0.2-0.6MPa working temperature: 5-50 C 3）罐体材料：玻璃钢/碳钢衬胶/不锈钢 3) tank material: FRP / carbon steel liner / stainless steel. 4）阀体材料：高强度塑料或铜制 4) body material: high strength plastic or copper 5）流量范围：1-100t/h 5) flow range: 1-100t/h 6) 工作电压：220V/380V，50/60HZ 6) working voltage: 220V/380V, 50/60HZ 7）控制方式：时间型、流量型 7) control mode: time type and flow type |
| 上一页 医药行业水处理解决方案 |
| 下一页 电子超纯水工作原理 |