| 软化水设备的使用常识 |
| 添加时间：2021/11/30 14:14:20 浏览次数： |
| 软化水设备的使用常识 Common sense of using softened water equipment 1、软化水设备的选型 1. Selection of softened water equipment 选用全自动软化水设备时是依据用户的水质状况和用水来定。水质硬度高、用水量大就要挑选大型号的软化水处理设备。反之假如水质较好，用水量不是很大的话则可选用小型的全自动软化水设备，不占用过多空间。 The selection of automatic water softening equipment is based on the water quality and water consumption of users. With high hardness and large water consumption, large-scale softened water treatment equipment should be selected. On the contrary, if the water quality is better and the water consumption is not very large, then small-scale automatic water softening equipment can be selected, which does not occupy too much space. 2、软化水设备去除的物质 2. Material removed by softened water equipment 软化水设备主要是去除水中的钙、镁离子，但对水中的漂白粉起不了多大的作用。 The main purpose of softened water equipment is to remove calcium and magnesium ions in water, but it has little effect on bleaching powder in water. 3、软化水设备的吸盐周期 3. Salt absorption period of softened water equipment 对于设备吸盐周期的判断要钢制闸门 钢坝 保定轻钢别墅 保定平面设计培训 保定室内设计培训 保定办公家具 经过两个因素来进行判断，即盐箱大小和控制器的型号。而控制器的型号越大，那么设流量就越大，从而吸盐就越快，周期就越短；控制器的型号越小，射流量就越小，吸盐速度越慢，周期就越长。 There are two factors to judge the salt absorption period of the equipment, that is, the size of the salt tank and the model of the controller. The larger the model of the controller is, the larger the set flow rate is, thus the faster the salt absorption is and the shorter the period is; the smaller the model of the controller is, the smaller the injection flow rate is, and the slower the salt absorption speed is, the longer the period is. |
| 上一页 |
| 下一页 水处理技术发展空间广阔 |